Checking your home for mold is something that every homeowner should do if they want to protect their investment and the health of their family, since mold has been known to cause health problems for hundreds, if not thousands of years. Breathing problems and numerous different types of infections have arisen from breathing in or coming into contact with mold and its spores, not to mention the allergic reactions that some people have. Around one third of the population is allergic to mold, but most people do not realize that even dead mold spores can cause allergic reactions.
There are a number of reasons that you should check for mold in your home and signs that should tell you where to check. Any room that has a large amount of water going in and out of it every day should be considered at risk for mold growth and while this usually includes the bathroom, kitchen, and laundry room, it can also include the basement.
The basement should be considered for another reason: it is underground. Humidity builds up easily in basements, especially those that have not been properly waterproofed. Water can leak into this room from the outside of the house, but it can also leak in from cracks in the concrete formed by ground water. If you have any plans on finishing your basement with drywall, you should get the water issues in the basement solved as thoroughly as you can.
The floor of your bathroom and kitchen should also be completely waterproofed. You can install any kind of flooring that you like (although hardwood is not recommended) as long as it is sealed so that water does not get underneath and soak into the floor boards. This can rot the floor over time and cause it to fall right out from underneath you, but before that happens, mold growth is very common.
Mold has also been known to grow on bathroom and kitchen ceilings and walls because the steam has nowhere to go. Both of these rooms should have exhaust vents that will pull the steam out of the room. If not, it becomes absorbed by the ceiling and upper walls and will cause mold growth.
Another problem occurs when people put carpet in moist areas of their home. While most people do not put carpet in the kitchen, some have been known to put carpet in the bathroom. Since water is dripped onto the floor almost every single day in the bathroom, this is one of the worst bathroom remodeling ideas going. No matter how careful you care, mold will eventually start to grow underneath this carpet and you will have to throw it out.
Jim Corkern is a writer and promoter of quality
North Carolina Sewage Damage Cleanup and other states such as
South Carolina mold remediation companies across the united states.
Saturday, September 29, 2007
Benefits of a Home and Mold Inspection
Home inspections are the most important thing that you can have done before you purchase a home, since many, many people who have not had them done have thoroughly regretted it. Those who do not have home inspections are typically the victims of problems with their home that cost thousands of dollars to have repaired, even though the seller of the property insisted that there was nothing wrong with it at all. It is important to include a clause in your purchase contract that states that the contract is not valid until a home inspection and if possible, a mold inspection, has taken place. This will ensure that there is either nothing wrong with the home that you wish to purchase or it will let you know every problem that there may be. Home inspections are vital to make an informed decision on whether you want to purchase a particular property or not.
Several areas of the home will be inspected, including the electrical system, plumbing system, roof, basement, foundation, attic, air conditioning system, and any other structural part of the home. If there is any hidden damage to the home that an untrained eye may not be able to detect, then this inspection will reveal it to you. Failing to have a home inspection done before you purchase a property can cost you thousands of dollars, especially if you plan on renovating the property for profit. House flippers have failed to have home inspections done in the past and have gone terribly over their budget due to problems they did not know existed.
Any water damage done to the home in the past that has not been repaired should be reported to you, as well. Mold inspections should always be done whether water damage is found or not, even though mold is more likely to grow in homes that have had water damage. Mold cannot survive without moisture and any problems with the plumbing should also yield clues as to whether mold might be found in the home, especially near the area of the leak.
The price of mold and home inspections is not too cheap, but when you think about the possible money that you could be saving, the cost is pretty negligible. When you purchase a structurally sound home not in need of many repairs for a good price, you will most likely not miss the money spent on these inspections and if you turn down a home due to the inspections revealing problems that could cost you large sums of money, you will be more than thankful for having it done.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
Several areas of the home will be inspected, including the electrical system, plumbing system, roof, basement, foundation, attic, air conditioning system, and any other structural part of the home. If there is any hidden damage to the home that an untrained eye may not be able to detect, then this inspection will reveal it to you. Failing to have a home inspection done before you purchase a property can cost you thousands of dollars, especially if you plan on renovating the property for profit. House flippers have failed to have home inspections done in the past and have gone terribly over their budget due to problems they did not know existed.
Any water damage done to the home in the past that has not been repaired should be reported to you, as well. Mold inspections should always be done whether water damage is found or not, even though mold is more likely to grow in homes that have had water damage. Mold cannot survive without moisture and any problems with the plumbing should also yield clues as to whether mold might be found in the home, especially near the area of the leak.
The price of mold and home inspections is not too cheap, but when you think about the possible money that you could be saving, the cost is pretty negligible. When you purchase a structurally sound home not in need of many repairs for a good price, you will most likely not miss the money spent on these inspections and if you turn down a home due to the inspections revealing problems that could cost you large sums of money, you will be more than thankful for having it done.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
New Jersey mold remediation contractor companies across the united states.
What to Know About Hiring a Contractor
Hiring a contractor to build your house might be some tricky business, especially since there are so many factors involved, but it does not have to be a nightmare if you do your research and know what to look for.
First of all, the contractor that you choose needs to be a licensed one. After you discover that they are licensed, find out if there have been any lawsuits or claims filed against that license. They should also have the appropriate levels of insurance so if anyone is injured while they are on your property, you are not liable for their medical bills.
Second of all, you need to talk to each contractor you are considering in person and make sure that you can get along with this person. You both need to be able to get along so you can concentrate on the process of building the home instead of arguing about this or that. This person will be in your life for at least a few months, so hiring someone that you can tolerate is important.
Next, you need to get references from each contractor that you talk to and talk to those references at length and make sure that the contractor does good work. Ask if they have had any mold or water damage issues since their home was constructed or since their remodeling work was finished. Mold may be the most important issue to look for, since this gets built into new homes more often than most people think due to materials being stored directly on the ground or because they have been rained on.
You should also consider what your contract with this person is going to have in it. You should schedule a date for when the project will start and an approximate date that you want it to have been completed by. If you are expecting a baby or any other major event that will require you to have the home completed, take this into account when hiring your contractor. Find out when they can start on the project and if you do not have any room to be flexible (this is rare), consider hiring someone else.
The contract also needs to contain exactly what materials you want your home to be built from, from the kitchen counter material to the type of finish you want on all the hardware. Be very specific and do not give room for any substitutions, since some contractors will substitute lower grade materials without you noticing if they can get away with it.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration contractors and other states such as
North Carolina mold remediation contractor companies across the united states.
First of all, the contractor that you choose needs to be a licensed one. After you discover that they are licensed, find out if there have been any lawsuits or claims filed against that license. They should also have the appropriate levels of insurance so if anyone is injured while they are on your property, you are not liable for their medical bills.
Second of all, you need to talk to each contractor you are considering in person and make sure that you can get along with this person. You both need to be able to get along so you can concentrate on the process of building the home instead of arguing about this or that. This person will be in your life for at least a few months, so hiring someone that you can tolerate is important.
Next, you need to get references from each contractor that you talk to and talk to those references at length and make sure that the contractor does good work. Ask if they have had any mold or water damage issues since their home was constructed or since their remodeling work was finished. Mold may be the most important issue to look for, since this gets built into new homes more often than most people think due to materials being stored directly on the ground or because they have been rained on.
You should also consider what your contract with this person is going to have in it. You should schedule a date for when the project will start and an approximate date that you want it to have been completed by. If you are expecting a baby or any other major event that will require you to have the home completed, take this into account when hiring your contractor. Find out when they can start on the project and if you do not have any room to be flexible (this is rare), consider hiring someone else.
The contract also needs to contain exactly what materials you want your home to be built from, from the kitchen counter material to the type of finish you want on all the hardware. Be very specific and do not give room for any substitutions, since some contractors will substitute lower grade materials without you noticing if they can get away with it.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration contractors and other states such as
North Carolina mold remediation contractor companies across the united states.
Subscribe to:
Posts (Atom)
